This month you can choose to create something truly geometric, or a single body part, from a single sheet (regular polygon). So boxes, tatos, vases, or a nose, an eye, ...
The judge for this challenge will be announced in a week when the poll is over.
Re: Monthly Design Challenge / April 2017
Posted: April 11th, 2017, 2:36 am
by NeverCeaseToCrease
Hello, this is my first challenge!!
Normally I don't design or fold this fast but today I had very little homework.
Here is my baseball cap and a crease pattern. It consists of 6 squares and 6 triangles, and two trapezoids at the bottom for the brim. I hope it's geometric enough...
If it doesn't work let me know and I'll try again.
Re: Monthly Design Challenge / April 2017
Posted: April 14th, 2017, 6:21 pm
by l0lm4tt
just to clarify, is it ok to create a body part from any animal or insect or is it limited to human body parts?
Re: Monthly Design Challenge / April 2017
Posted: April 24th, 2017, 4:19 pm
by Baltorigamist
I don't see why not. As the one who suggested "body parts" as a topic, I figured animal body parts should be acceptable.
Re: Monthly Design Challenge / April 2017
Posted: April 30th, 2017, 5:28 pm
by firstfold
CUBE - cube
Cube the reduces to a smaller cube with 1/8 of the original volume
Re: Monthly Design Challenge / April 2017
Posted: April 30th, 2017, 6:58 pm
by origami_8
By the way, the judge for this month is yagowe. Congratulations!
Re: Monthly Design Challenge / April 2017
Posted: May 2nd, 2017, 8:44 pm
by yagowe
Not a lot of entries to choose from, so I won't get into a big discussion of why I chose which one.
Winner this month is firstfold with his cube.
NeverCeaseToCrease's baseball cap is the runner-up.
So firstfold will judge May and choose the topic for June.