This is a picture of my work so far:
https://s31.postimg.org/mvsmedd0r/IMG_2 ... 181745.jpg
I'm using 40 x 40cm paper of weight 60g/m2.
I'm concerned that my paper is too thick because the body of the ant spreads quite a bit. What do you think, is it worth finishing? I'm not sure what paper would be better, the paper I used was costly. I don't want to spend that much again.
Best paper for Robert Lang's ant
Re: Best paper for Robert Lang's ant
I think you should finish it. You can lock the body by tucking the lower part of the flap under the other part of the body. I think that's what the diagrams say as well. Other than that, the thickness and paper size shouldn't be much of a problem.
- BM-origami-design
- Newbie
- Posts: 42
- Joined: November 4th, 2014, 4:25 pm
- Location: The Netherlands
- Contact:
Re: Best paper for Robert Lang's ant
You should definitely finish it.
You might consider using MC on the legs to make them easier to fold thinner but certainly finish it. Even if you think it might not be that great….usually it still is
You are your own worst critic
You might consider using MC on the legs to make them easier to fold thinner but certainly finish it. Even if you think it might not be that great….usually it still is
You are your own worst critic
More work from me?
Visit https://bmorigamidesign.wordpress.com/
Visit https://bmorigamidesign.wordpress.com/
Re: Best paper for Robert Lang's ant
just fyi, this ant is very doable with ordinary kami. it looks great with a 7" precut square, but if you're new, 10" is a good starting point.Mycelium wrote:This is a picture of my work so far:
https://s31.postimg.org/mvsmedd0r/IMG_2 ... 181745.jpg
I'm using 40 x 40cm paper of weight 60g/m2.
I'm concerned that my paper is too thick because the body of the ant spreads quite a bit. What do you think, is it worth finishing? I'm not sure what paper would be better, the paper I used was costly. I don't want to spend that much again.
Re: Best paper for Robert Lang's ant
BM-origami-design wrote:You should definitely finish it.
You might consider using MC on the legs to make them easier to fold thinner but certainly finish it. Even if you think it might not be that great….usually it still is
You are your own worst critic
Alright, I'll finish it, if I'm not too embarrassed about the result I'll put up a picture!myself wrote:I think you should finish it. You can lock the body by tucking the lower part of the flap under the other part of the body. I think that's what the diagrams say as well. Other than that, the thickness and paper size shouldn't be much of a problem.
I've never heard of MC but I've just now looked into it. Would you mind giving me a brief explanation of how it's used and what it's for? People talk about resizing, but I'm not completely sure what they mean by that.
Re: Best paper for Robert Lang's ant
I've got some 6.89"/17.5cm kami so ill give it a go. I tend to think complex model = big paper. Thanks for your inputbethnor wrote:just fyi, this ant is very doable with ordinary kami. it looks great with a 7" precut square, but if you're new, 10" is a good starting point.Mycelium wrote:This is a picture of my work so far:
https://s31.postimg.org/mvsmedd0r/IMG_2 ... 181745.jpg
I'm using 40 x 40cm paper of weight 60g/m2.
I'm concerned that my paper is too thick because the body of the ant spreads quite a bit. What do you think, is it worth finishing? I'm not sure what paper would be better, the paper I used was costly. I don't want to spend that much again.
Re: Best paper for Robert Lang's ant
using larger sheets for complex models is in general a good principal. nothing in that book, however, needs anything more than 35 cm.
-
- Moderator
- Posts: 2376
- Joined: December 25th, 2011, 7:15 pm
- Location: Inside my twisted mind....
Re: Best paper for Robert Lang's ant
http://snkhan.co.uk/forum/viewtopic.php?f=21&t=4578Mycelium wrote:I've never heard of MC but I've just now looked into it. Would you mind giving me a brief explanation of how it's used and what it's for? People talk about resizing, but I'm not completely sure what they mean by that.
^This topic has a lot of information on MC. I'm not sure exactly where the info you're looking for is, but I guarantee it's somewhere in there.
Also, I second Bethnor's comment about the size of paper needed for models in that book. A few years ago, I did the scorpion pretty easily from ~20cm paper.