Kamiya Pegasus 3.0 crease pattern

Need help with folding a model? Ask here.

Kamiya Pegasus 3.0 crease pattern

Postby NeverCeaseToCrease » September 13th, 2017, 5:16 am

Hi everybody,
I have found the crease pattern for Satoshi Kamiya's newest pegasus 3.0:
http://www.folders.jp/g/2016/1607.html

However, there are no reference points and I'm not very good at folding 22.5 degree crease patterns. There also appear to be super dense creases where the shoulders should be, which I'm not sure how to fold.

Any help would be appreciated.
Gallery of my own designs with some CPs: http://snkhan.co.uk/forum/viewtopic.php?f=15&t=14078
User avatar
NeverCeaseToCrease
Super Member
 
Posts: 151
Joined: April 7th, 2017, 4:54 am
Location: USA

Re: Kamiya Pegasus 3.0 crease pattern

Postby Bodo » September 13th, 2017, 12:43 pm

Here is the reference ( it was drawn for an other model, but the idea is the same )
https://mobile.twitter.com/bodo_ori/status/891566365911461888/photo/1
for folding, I would recommend to make some test folds of the parts you don't understand and when folding the whole thing, I would recommend precreasing all lines, and then collapse it, I don't think that there is a good folding sequence.
hope this helps :D
User avatar
Bodo
Junior Member
 
Posts: 52
Joined: July 13th, 2014, 11:45 am
Location: Germany

Re: Kamiya Pegasus 3.0 crease pattern

Postby NeverCeaseToCrease » September 15th, 2017, 2:13 am

Ok, I've found the reference points, but which creases on the cp do the reference points correspond to?
Gallery of my own designs with some CPs: http://snkhan.co.uk/forum/viewtopic.php?f=15&t=14078
User avatar
NeverCeaseToCrease
Super Member
 
Posts: 151
Joined: April 7th, 2017, 4:54 am
Location: USA

Re: Kamiya Pegasus 3.0 crease pattern

Postby phillipcurl » September 15th, 2017, 4:00 am

I overlayed it but I am failing to see anywhere that the reference points correspond to...
Image
So i threw this together right quick.
Image

The red point on there will be your main reference point. Might be a couple more I missed but I haven't slept in something like 30 hours, so I'm gonna re-check it in the morning. Most everything else you should be able to find with some simple geometry and measurements and of course folding :)

Good luck, this one looks like a pain!
flickr gallery
Youtube channel
Phillip
phillipcurl
Moderator
 
Posts: 1642
Joined: October 25th, 2011, 2:51 pm
Location: Senoia, GA

Re: Kamiya Pegasus 3.0 crease pattern

Postby Bodo » September 15th, 2017, 12:26 pm

the vertical line on the bottom left side, it's basicially the same point as the one you found.
I drew the reference point for another model on this forum, so you can ignore most of the lines ;)
User avatar
Bodo
Junior Member
 
Posts: 52
Joined: July 13th, 2014, 11:45 am
Location: Germany

Re: Kamiya Pegasus 3.0 crease pattern

Postby phillipcurl » September 15th, 2017, 1:00 pm

Ah, I see it now! Not sure how I missed that last night.
flickr gallery
Youtube channel
Phillip
phillipcurl
Moderator
 
Posts: 1642
Joined: October 25th, 2011, 2:51 pm
Location: Senoia, GA

Re: Kamiya Pegasus 3.0 crease pattern

Postby NeverCeaseToCrease » September 16th, 2017, 1:07 am

Thanks, overlapping it was a great idea.
The only thing I don't get is how do I find where the pleats from the hooves meet the 22.5 degree part?
Gallery of my own designs with some CPs: http://snkhan.co.uk/forum/viewtopic.php?f=15&t=14078
User avatar
NeverCeaseToCrease
Super Member
 
Posts: 151
Joined: April 7th, 2017, 4:54 am
Location: USA

Re: Kamiya Pegasus 3.0 crease pattern

Postby Baltorigamist » September 16th, 2017, 1:27 am

Don't quote me on this, but if you continue the lower bisector on the bottom right, it looks like that meets the other bisector (in Phillip's overlay) at the upper edge of the hoof pleats. From there, just divide that horizontal part into thirds.
After the fall...we rise.

My Flickr DeviantArt
Baltorigamist
Moderator
 
Posts: 1881
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted little mind....


Return to Diagrams & Crease Patterns

Who is online

Users browsing this forum: No registered users and 3 guests