Page 1 of 1

Kamiya Pegasus 3.0 crease pattern

PostPosted: September 13th, 2017, 5:16 am
by NeverCeaseToCrease
Hi everybody,
I have found the crease pattern for Satoshi Kamiya's newest pegasus 3.0:
http://www.folders.jp/g/2016/1607.html

However, there are no reference points and I'm not very good at folding 22.5 degree crease patterns. There also appear to be super dense creases where the shoulders should be, which I'm not sure how to fold.

Any help would be appreciated.

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 13th, 2017, 12:43 pm
by Bodo
Here is the reference ( it was drawn for an other model, but the idea is the same )
https://mobile.twitter.com/bodo_ori/status/891566365911461888/photo/1
for folding, I would recommend to make some test folds of the parts you don't understand and when folding the whole thing, I would recommend precreasing all lines, and then collapse it, I don't think that there is a good folding sequence.
hope this helps :D

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 15th, 2017, 2:13 am
by NeverCeaseToCrease
Ok, I've found the reference points, but which creases on the cp do the reference points correspond to?

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 15th, 2017, 4:00 am
by phillipcurl
I overlayed it but I am failing to see anywhere that the reference points correspond to...
Image
So i threw this together right quick.
Image

The red point on there will be your main reference point. Might be a couple more I missed but I haven't slept in something like 30 hours, so I'm gonna re-check it in the morning. Most everything else you should be able to find with some simple geometry and measurements and of course folding :)

Good luck, this one looks like a pain!

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 15th, 2017, 12:26 pm
by Bodo
the vertical line on the bottom left side, it's basicially the same point as the one you found.
I drew the reference point for another model on this forum, so you can ignore most of the lines ;)

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 15th, 2017, 1:00 pm
by phillipcurl
Ah, I see it now! Not sure how I missed that last night.

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 16th, 2017, 1:07 am
by NeverCeaseToCrease
Thanks, overlapping it was a great idea.
The only thing I don't get is how do I find where the pleats from the hooves meet the 22.5 degree part?

Re: Kamiya Pegasus 3.0 crease pattern

PostPosted: September 16th, 2017, 1:27 am
by Baltorigamist
Don't quote me on this, but if you continue the lower bisector on the bottom right, it looks like that meets the other bisector (in Phillip's overlay) at the upper edge of the hoof pleats. From there, just divide that horizontal part into thirds.