rolling the tissue onto the foil is best to avoid bubbles and sacrifice one end of the tissue so you can clamp it down to the table:
- Make foil longer than tissue and tape down to work surface
- Roll tissue onto a large firm tube (i use a piece of PVC pipe form the hardware store)
- Put tissue roll on foil and clamp the loos edge down, i use a long ruler accross the edge of the paper and clamps form the hardware store
- Paint or spray glue onto the foil
- roll out the tissue, pressing firmly on your roll as you go and using some pressure and you should have little or no wrinkles or bumps
you will loose 2 or three inches on the end where you clamped and had the roll sitting, but you will get a much better result, in my experience, so well worth it.
GeorgianFolder wrote:what is best way to remove bubbles?