What have you folded lately?

artur biernacki · Post by **artur biernacki** » July 17th, 2006, 9:08 am

Looks good Artur! where did you get the CP?

I found this CP in internet.

http://www.h5.dion.ne.jp/~origami/LOVEL ... 5:38-1.jpg

Best regards Artur Biernacki

eric_son · Post by **eric_son** » July 17th, 2006, 1:01 pm

While waiting for my project to compile and deploy (it takes a while... I've got a low-end workstation), I decided to grab a sheet of copy paper from our office's scratch paper bin.

I then started to work on Charles Esseltine's Dragon In Flight:

Forgive the blurry pix... I used my cellphone camera.

Post by **origami_8** » July 17th, 2006, 7:34 pm

Snake charmer by Fred Rohm:

A very charming model, also if the folding instructions are sometimes a little bit hard to understand. I especially like the colourchanges on this model.

Old Sol by Kunihiko Kasahara:

I tested it and can say for sure, this model is recognizable as sun easily, you really donÂ´t need to paint a face on it.

Tjips · Post by **Tjips** » July 17th, 2006, 8:46 pm

My latest. I have succeeded in merging two interrests. I constructed these models using a construction set of my own design. Some of these pieces aren't possible in any other sets. (that I know of at least)

Soma cube

from...

4x4x4 cube {Puzzle design by Tom Jolly}

from...

(note, the far right piece is one of those impossible ones)

Keyholes {also by Tom}

from 6 of these...

That's it for now. Oh, and I still need a name for that design. tx

malachi · Post by **malachi** » July 17th, 2006, 10:29 pm

Tjips wrote:(note, the far right piece is one of those impossible ones)

What makes it impossible with Sonobe units?

Cupcake · Post by **Cupcake** » July 18th, 2006, 12:25 am

I made my sixth attempt at Charles Esseltine's Dragon in flight 2.5... I've done 2 of those Dragons every day, and I finally got everything right

And, as Aznman told me to, I used some better paper... actually, It's just normal paper with green crayoned on... but the wax from the crayons makes the paper much different and easier to fold... Anyway, heres a picture of the dragon (one with flash and one without):

It worked very well! If you keep on practicing, you'll suceed... someday

adams chen · Post by **adams chen** » July 18th, 2006, 9:51 am

How about this? Not complete yet!!! ^__^

Raptor skeleton!

And the flower! Dancing lady orchid!

Post by **TheRealChris** » July 18th, 2006, 12:44 pm

please stop posting your pictures in multiple threads! thanks.

mastermattdude · Post by **mastermattdude** » July 18th, 2006, 8:08 pm

I made another ancient dragon by kamiya satoshi (or is it satoshi kamiya?)and this time I think I finally made it acceptable.

close-up

Aznman · Post by **Aznman** » July 18th, 2006, 9:11 pm

Very nice matt.

It is Satoshi Kamiya, by the way, 1000th post!

Joseph Wu · Post by **Joseph Wu** » July 18th, 2006, 9:42 pm

Actually, Japanese names have the family name first, followed by the given name, so it should be Kamiya Satoshi.

rokonacdc · Post by **rokonacdc** » July 18th, 2006, 10:43 pm

haha i knew it was kamiya satoshi and not the other way

mastermattdude · Post by **mastermattdude** » July 19th, 2006, 1:41 am

Thank you very much for the compliment aznman and thanks Joseph for clarifying the names

. And also, if anyone wants to know, for the ancient dragon I used tissue foil about 95 cubic cm.

eric_son · Post by **eric_son** » July 19th, 2006, 2:00 am

That's amazing!

I'm still trying to muster the courage to start working on that model.

Aznman · Post by **Aznman** » July 19th, 2006, 3:55 am

Oh, so Satoshi is Kamiya's last name? and Kamiya is Satoshi's first name?

Now I kind of get it.

I designed a Atlas beetle. I only have the CP right now because our camera is gone for the day, but I should get pictures tommorrow.

As some of you see, there are useless flaps at the bottom... it's a waste, but the model did work, so I'm fine with that.