Page 21 of 25

Re: ORIPA

PostPosted: June 5th, 2014, 6:16 am
by Swapnil Das
That's great! The problem was in my Java. Can you send me that too?

Re: ORIPA

PostPosted: July 6th, 2014, 11:48 am
by Swapnil Das
Oripa Finally works for me!!!! Yoo-hoo!! But when I save the CP, or the folded form, the folded from comes in blue instead of the pale-ish orange color. And the CP has dashed red mountain lines instead of thin blue and red lines. How do I fix that?

Re: ORIPA

PostPosted: July 6th, 2014, 1:30 pm
by Mir Numaan
because the version of oripa is older. Download the latest version from Jun Mitani's website. :D

Re: ORIPA

PostPosted: July 6th, 2014, 2:24 pm
by Swapnil Das
I did download it from his website.

Re: ORIPA

PostPosted: July 8th, 2014, 2:24 pm
by Swapnil Das
So I'm drawing CP for a Sierpinski Gasket L(2) and I've finished the CP. No errors on the check window. Yet, when I click fold, it says that it failed to fold. :? Any help?

Re: ORIPA

PostPosted: July 8th, 2014, 5:24 pm
by FlareglooM
Can you send me the file? It makes it easier to check what is wrong :)

Re: ORIPA

PostPosted: July 8th, 2014, 8:08 pm
by Swapnil Das
Alright. :D PM me you're email-address. I can send it to you easier that way.

Re: ORIPA

PostPosted: July 9th, 2014, 1:32 am
by Dj origami
Swapnil Das wrote:So I'm drawing CP for a Sierpinski Gasket L(2) and I've finished the CP. No errors on the check window. Yet, when I click fold, it says that it failed to fold. :? Any help?

there is no L2 so far. only L3 (mine), L4,L5(Kei's)

Re: ORIPA

PostPosted: July 9th, 2014, 8:10 am
by Swapnil Das
I've made my own. Would you like the CP?

Re: ORIPA

PostPosted: July 9th, 2014, 11:38 am
by Dj origami
Swapnil Das wrote:I've made my own. Would you like the CP?

no thanks. I have made my own as well...
Image

Sierpinski Gasket L2 by DJorigami, on Flickr

Re: ORIPA

PostPosted: July 9th, 2014, 12:11 pm
by Swapnil Das
Great, we both have our own one. :D

Re: ORIPA

PostPosted: July 9th, 2014, 12:17 pm
by Swapnil Das

Re: ORIPA

PostPosted: July 27th, 2014, 10:04 am
by Swapnil Das
Hey, guys. So, I'm trying to draw Djordje's Sierpinski Gasket L3 cp and I can't make the "border" line that goes around the hexagon. Here's the problem:

Image

I can't find reference for it. ANy help? How do I find references like this in Oripa?

Re: ORIPA

PostPosted: July 27th, 2014, 3:31 pm
by Brimstone
Swapnil Das wrote:Hey, guys. So, I'm trying to draw Djordje's Sierpinski Gasket L3 cp and I can't make the "border" line that goes around the hexagon.

I can't find reference for it. ANy help? How do I find references like this in Oripa?


This is where the "measure" tool comes in very handy. For that reference you need to find the angle at which the creases that come from the sides that connect with the opposite side are. To make this clearer consider the bottom edge. You need to make creases from the center of the sides that are connected with the horizontal edge at the top. For the angle you copy the angle from said edges (the sides that are connected with the horizontal edge at the top).

To find the angle you use the measure angle tool and you click on the 3 points that make that angle. Then with the measure of that angle, you make creases starting at the center of the mentioned sides. How long these creases you jight ask. Just make them long enough as to intersect the bottom edge and then delete the extra lines.

It seems difficult to explain but it is not that difficult to make. Just experiment with the measure tool a bit.

Re: ORIPA

PostPosted: July 27th, 2014, 5:32 pm
by Swapnil Das
Can't really get it, unfortunately. :( One thing you could do is record a video of this explanation while showing how to do it in oripa. Use Screencast-o-matic from here: http://download.cnet.com/Screencast-O-M ... tag=button