Page 1 of 2

Twisted Wire Art

Posted: January 28th, 2006, 1:43 pm
by thedeadsmellbad
Made by the members of Yahoo Group Twisted Wire Art!
ImageImageImageImage
ImageImageImageImage

My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember. I couldn't find anything online about the subject, so I made some makeshift instructions and posted them. Now others have learned & taken it further with new models. Seeing their creations I has inspired me in turn to create new things.
Links
Yahoo Group Twisted Wire Art!(in Italian)
My main Gallery (Access will be denied depending on where you live)
Instructions on the Vietnam Origami Group forum
Another source for Instructions (access limited)
My Gallery on flickr

Posted: February 10th, 2006, 5:06 am
by thut
Wow they look great! :)

Re: Twisted Wire Art

Posted: February 22nd, 2006, 6:13 pm
by Ondrej.Cibulka
My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember.
Vhich one? Gold or green? Or they have the same design? :?:

Posted: February 23rd, 2006, 5:01 am
by thedeadsmellbad
All of the models are based on the same design.
Check the link for instructions and more examples of how versitile they can be :)

Posted: May 4th, 2006, 4:59 pm
by polop
They are realy cool. you are realy talented






Wooooo 50th post!!! 8)

Re: Twisted Wire Art

Posted: June 11th, 2006, 9:26 pm
by thedeadsmellbad
Thanks!

Ondrej.Cibulka wrote:
My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember.
Vhich one? Gold or green? Or they have the same design? :?:
this is more or less the scorpion as it was taught to me.

ImageImageImage

x

Posted: June 17th, 2006, 12:15 am
by rokonacdc
they look very nce

Posted: December 4th, 2006, 2:23 am
by thedeadsmellbad
<embed src="http://www.youtube.com/v/VKLbyICqxfc" type="application/x-shockwave-flash" wmode="transparent" width="320" height="250"></embed>

I hope this is easy enough to learn from.
If you make one please post a photo!
Use this same method to come up with your own creations!!!!

Posted: December 4th, 2006, 2:31 am
by thedeadsmellbad
Lesson #1
Image
Wire Twisted Scorpion.
I will add instructions for different models upon request.


1.12 wires, equal length
2.Divide wires into 2 groups of 4 and 8. 8 wires = Legs, 4 = everything else.
3.Loop 8 wires in the center.
4.Left over right.
5.Finished loop.

ImageImageImageImageImage

6.All wires must loop the same, Left over right.
7.8 wires with loop. All Left over right. Finished.
8.Place the 4 wires into all the loops.
9.Loops are all the same direction.
10.Make the loops tight.

ImageImageImageImageImage

11.Finished view.
12.View from behind.
13.Bend over the front, to the opposite side. Use the first wire.
14.Bend behind to the opposite side. Use the same wire.
15.Repeat step 13-14 with top wire. (Opposite side, opposite direction.)

ImageImageImageImageImage

16.View of steps 1-15 complete.
17.Repeat step 15 on all wires. (16 total, 8 on each side.)
18.Finished close up view.
19.Turn model over. Close up view of back side.
20.Long side of body pointing up.

ImageImageImageImageImage

21.Seperate 2 wires on one side. Use the top wires.
22.Twist 2 wires together.
23.Repeat on all other wires, both sides.
24.Finished twisting legs.
25.Wrap 1 wire around the other 3.

ImageImageImageImageImage

26.Wrap 1 wire around the other 2.
27.Wrap 1 wire around the last wire. Use half the length to wrap, use other half to form the stinger.
28.Turn model over.
29.Seperate wires into 2 pairs.
30.Twist each pair. Partial twist. Less than halfway.

ImageImageImageImageImage

31.Trim the legs and claws. Use wire cutters.
32.Bend the legs above the body.
33.Bend the legs below the body. Shape the claws and tail.

ImageImageImage

Finished veiw of the completed model.
ImageImageImageImageImage

Posted: December 19th, 2006, 10:53 pm
by Lux Aeterna
Wow, those are awesome. Is the larger scorpion (pictured in green) made pretty much the same way, but with more/longer wires?

Posted: December 20th, 2006, 10:59 pm
by thedeadsmellbad
Lux Aeterna wrote:Wow, those are awesome. Is the larger scorpion (pictured in green) made pretty much the same way, but with more/longer wires?
Thank you, I believe she used the same amount, but used more length on the 4 wires making the tails and claws. She also used a wire similiar to the flat twist tie wires covered in a flat plastic used to seal bread bags with.

Posted: December 21st, 2006, 11:02 am
by giro
Exist some books about wire art, or some web sites with patterns.

Giro.

Posted: December 22nd, 2006, 2:11 am
by thedeadsmellbad
giro wrote:Exist some books about wire art, or some web sites with patterns.

Giro.
To my knowledge there is nothing out there yet about this particular style of wire twisted art.

Posted: January 13th, 2007, 6:04 am
by thedeadsmellbad
Here is the first post I have seen since I made the video.
It looks like the person who made it is in Sweden. :)
As far as I know, this is the first "non-paper folder" to try it!
<embed src="http://www.youtube.com/v/UQ70UXVS9vk" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed>

Posted: March 7th, 2007, 2:02 am
by thedeadsmellbad
Dragonfly
Lorraine Barnett
Image

Scorpion
TheDeadSmellBad
Image
Image
Image