Devil Cobra

General discussion area for learning about paper, and the different types available.
Post Reply
tanja9999
Newbie
Posts: 1
Joined: August 31st, 2017, 2:31 pm

Devil Cobra

Post by tanja9999 »

I have a question...
I made this Origami model callled Devil Cobra by Kade Chan. The size of the Paper is 1:33 meters and the snake is really big. I glued the scales and bought a soft body inside for the snake. Now I have the problem, that the paper doesn't look good when I put it in the circle and also it tears apart. I had 70 houers for this model and I would be glad for some help.
I hope someone can help me
Andre-4
Senior Member
Posts: 319
Joined: July 14th, 2016, 8:16 pm

Re: Devil Cobra

Post by Andre-4 »

The glue was too thick...the paper cracked.try watering down the pva or use wallpaper paste..For now a vwer weak solution of water to wet fold it into shape use clips and dont dry in hurry
User avatar
origami_8
Administrator
Posts: 4371
Joined: November 8th, 2004, 12:02 am
Location: Austria
Contact:

Re: Devil Cobra

Post by origami_8 »

Yes, wet shaping is probably the best solution, but it needs a lot of patience.
Post Reply