Satoshi Kamiya - Wizard

Need help with folding a model? Ask here.

Re: Satoshi Kamiya - Wizard

Postby redheadorigami » October 2nd, 2011, 5:39 pm

bethnor wrote:no.

Image
Is tant too thick?
Ps. Mods: please dont remove this!
"Violence isn't the answer but it's always a good start."
-JeossMayhem
User avatar
redheadorigami
Forum Sensei
 
Posts: 691
Joined: January 24th, 2010, 4:55 pm
Location: Australia

Re: Satoshi Kamiya - Wizard

Postby bethnor » October 3rd, 2011, 1:42 am

well, to be honest, you can probably fudge quite a bit of the wizard by wet-folding and using clips to flatten/hold things in place. however, even with really thin paper, the staff gets really thick and mathematically it is almost impossible to wrap the fingers around it.
bethnor
Buddha
 
Posts: 1310
Joined: August 17th, 2006, 9:57 pm

Re: Satoshi Kamiya - Wizard

Postby Menschenfeind » October 3rd, 2011, 3:56 am

bethnor wrote:well, to be honest, you can probably fudge quite a bit of the wizard by wet-folding and using clips to flatten/hold things in place. however, even with really thin paper, the staff gets really thick and mathematically it is almost impossible to wrap the fingers around it.


I made the wizard once with thin paper and it wasn't able to stand up (the staff was fine though)
User avatar
Menschenfeind
Super Member
 
Posts: 153
Joined: August 20th, 2011, 3:28 am
Location: Chile

Re: Satoshi Kamiya - Wizard

Postby rwzheng1997 » March 14th, 2012, 3:30 am

Can someone help me on step 91? I unloosed the paper that was stuck in the triangle looking thing, but it still looks nothing like the picture of step 92.
rwzheng1997
Newbie
 
Posts: 39
Joined: July 8th, 2011, 6:44 pm

Re: Satoshi Kamiya - Wizard

Postby rwzheng1997 » March 26th, 2012, 5:14 am

nevermind I got it.
rwzheng1997
Newbie
 
Posts: 39
Joined: July 8th, 2011, 6:44 pm

Re: Satoshi Kamiya - Wizard

Postby Mikisu » April 27th, 2012, 8:36 am

Hi Everybody!
I have started folding the Wizard yesterday but today I also got stuck at the hands. By googling for help I got to this forum and found the post from Friet. It would be very helpful if I could download the rapidshare file. But I'm currently in China and rapidshare is blocked here. Could someone please upload it to another sharing site which is not blocked in China or e-mail me the pictures? I would be very thankful for it! :roll:
Mikisu
Newbie
 
Posts: 6
Joined: April 27th, 2012, 8:25 am

Re: Satoshi Kamiya - Wizard

Postby Baltorigamist » April 27th, 2012, 9:28 pm

I used Tant for my first fold of the model, and I didn't have any trouble whatsoever. Sure the staff is insanely thick, but hunks of wood aren't exactly narrow. :wink:
After the fall, we rise.

My Flickr
Baltorigamist
Moderator
 
Posts: 2319
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted little mind....

Re: Satoshi Kamiya - Wizard

Postby Mikisu » May 5th, 2012, 9:18 am

I got the hands :) This is the result of my first attempt. I am really pleased with the face. I used a 50x50 double tissue foil paper

Image
Mikisu
Newbie
 
Posts: 6
Joined: April 27th, 2012, 8:25 am

Re: Satoshi Kamiya - Wizard

Postby rwzheng1997 » May 26th, 2012, 12:02 am

aish, I used bond paper, because its really cheap, and in the end I had the 3 parts. A staff with part of an arm. The body, and the head with its arm. Not really a wizard anymore :P

The message: bond paper is too thick and weak. >:O
rwzheng1997
Newbie
 
Posts: 39
Joined: July 8th, 2011, 6:44 pm

Re: Satoshi Kamiya - Wizard

Postby IPutTheFunInFuneral » July 1st, 2012, 9:27 pm

Sorry to awaken a sleeping thread, but I'm having trouble with steps 105-108, and no, it's not because I'm missing pages 188-189 :P. Do you push the grey area inside the layers like a sink, or do you reverse forld it behind during the crimp? Thanks in advance for any help :D.
User avatar
IPutTheFunInFuneral
Newbie
 
Posts: 16
Joined: June 13th, 2012, 6:41 pm

Re: Satoshi Kamiya - Wizard

Postby folding paper » July 13th, 2012, 3:02 pm

If your missing page 188-190, then how do you Know step 105? :-k
folding paper
Junior Member
 
Posts: 54
Joined: July 10th, 2012, 1:41 am
Location: Maryland, USA

Re: Satoshi Kamiya - Wizard

Postby Baltorigamist » July 13th, 2012, 8:34 pm

They mean that they're not missing the pages. It could have been worded better, though.

To answer your question:
105 is just spreading out the pleats out so they form a single edge. Because of the restrictions of the paper, it won't lie flat like 106 shows.
There's no crimp. What you're basically doing is pushing in the gray square and following the crease lines--they should be the same on both sides. Then you just pinch the edges together (the ones along the arm) and flatten like in 108.
After the fall, we rise.

My Flickr
Baltorigamist
Moderator
 
Posts: 2319
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted little mind....

Re: Satoshi Kamiya - Wizard

Postby IPutTheFunInFuneral » July 16th, 2012, 2:55 pm

Thank you! I've done it now!
User avatar
IPutTheFunInFuneral
Newbie
 
Posts: 16
Joined: June 13th, 2012, 6:41 pm

Re: Satoshi Kamiya - Wizard

Postby easysid » November 30th, 2012, 1:04 pm

Hi, I am having problem in steps 129 onwards. I made it past the fingers, thanx to previous posts, but my model doesn't flatten in step 133

This is Step 29 and the creases. Red are mountain. There's some issue with the crease at the bottom, I am not sure of the references.

Image

Then as I work forward, the model doesn't flatten as the layer folded in step 130 doesn't stick to the back. Like this :

Image

Thank you.
easysid
Super Member
 
Posts: 134
Joined: February 11th, 2011, 10:48 am
Location: /dev/null

Re: Satoshi Kamiya - Wizard

Postby Mir Numaan » October 6th, 2013, 4:15 am

take a new sheet and fold from the start:easysid
Mir Numaan
Buddha
 
Posts: 1205
Joined: April 18th, 2013, 3:37 pm
Location: europa

PreviousNext

Return to Diagrams & Crease Patterns

Who is online

Users browsing this forum: No registered users and 24 guests

cron