Satoshi Kamiya - Ryu Zin (CP)

Need help with folding a model? Ask here.

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby rohanjakhar295 » December 9th, 2014, 5:38 pm

Can Someone post a m/v CP of Ryujin 2.1?
rohanjakhar295
Newbie
 
Posts: 1
Joined: December 9th, 2014, 5:21 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Kundalini » December 17th, 2014, 6:41 pm

I think you should be happy, because it look great with that paper. it's a lot of effort and time, Congratulations!

I am convinced that paper make the difference. So if i were you i would try with a better paper instead of increasing dimmension
User avatar
Kundalini
Junior Member
 
Posts: 81
Joined: November 24th, 2014, 1:13 am

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby myself » January 15th, 2015, 8:11 pm

This might be a really stupid question, but is it possible to make a decent fold of the 3.5 or the 2.1 version from a 65 gsm sheet of paper?
myself
Super Member
 
Posts: 130
Joined: March 31st, 2013, 2:33 pm
Location: Heemskerk, Netherlands

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby topsu » January 15th, 2015, 9:02 pm

65 gsm sounds fine to me. Weight does not equal thickness or folding properties though. And of course sheet size is what matters the most. What is the paper you're talking about?
User avatar
topsu
Senior Member
 
Posts: 408
Joined: December 29th, 2008, 2:45 pm
Location: Finland

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby myself » January 15th, 2015, 11:36 pm

Thank you for your quick reply. I was thinking about using my 1m x 10m sheet of Kraft paper. I tried folding Montroll's American Lobster with it and it worked really well. It seems like the thickness isn't that much of a problem with this paper, so I'll probably try the 3.5 soon.
myself
Super Member
 
Posts: 130
Joined: March 31st, 2013, 2:33 pm
Location: Heemskerk, Netherlands

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby OrigamiGeek » January 16th, 2015, 1:04 am

1m by 10m! Where do you get that big of paper?
Check out my gallery and don't forget to leave a comment!
User avatar
OrigamiGeek
Forum Sensei
 
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Exodia10000 » January 16th, 2015, 3:37 am

Hi can somebody help me with the head neck connection from Ryujin 3.5
Exodia10000
Newbie
 
Posts: 3
Joined: June 23rd, 2014, 4:58 am

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby myself » January 16th, 2015, 4:56 pm

OrigamiGeek wrote:1m by 10m! Where do you get that big of paper?


It's on a roll so it's pretty common. I ordered it from a webshop for office supplies.

Today I test-folded the scales and the head with scales on the neck. I want to start with the definitive version next Tuesday, but I still have a question. Which paper size should I use? 2m (6 ft 7 inches) or 2,5m (8 ft 3 inches)? I would rather use a 2m sheet, unless that makes the final result a lot worse. Thanks in advance.
myself
Super Member
 
Posts: 130
Joined: March 31st, 2013, 2:33 pm
Location: Heemskerk, Netherlands

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Dj origami » January 16th, 2015, 8:04 pm

I would recommend 2m instead of 2.5m because it's a lot easier to handle.
User avatar
Dj origami
Super Member
 
Posts: 219
Joined: November 11th, 2012, 3:22 pm
Location: Ljubljana,Slovenia / Nish,Serbia

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby malifold » January 24th, 2015, 8:33 pm

definitely 2m. That way you can handle the two halves separately until the last minute if you want to.
malifold
Super Member
 
Posts: 226
Joined: January 31st, 2012, 7:48 pm
Location: Metz, France

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Tomasz Krawczyk » January 25th, 2015, 5:56 pm

My attempt of Ryujin 3.5
Image

Image

Image
Tomasz Krawczyk
Super Member
 
Posts: 143
Joined: April 7th, 2014, 5:26 pm
Location: Poland

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Can Cebeci » February 21st, 2015, 10:19 am

I want to fold a ryujin 2.1 too but i really don't know what paper to use. I actually don't have many choices. I have kraft (80x80 cm /don't know about the gsm) and I have started folding one with that but I don't think it will end up nice. I can make tissue foil. Do you think tissue foil is a good choice? Also, I heard that there is a place where I can get japanese papers. If it was true, would one of them work for me?
Can Cebeci
Junior Member
 
Posts: 55
Joined: September 8th, 2014, 9:26 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Dj origami » February 21st, 2015, 8:44 pm

Can Cebeci wrote:I want to fold a ryujin 2.1 too but i really don't know what paper to use. I actually don't have many choices. I have kraft (80x80 cm /don't know about the gsm) and I have started folding one with that but I don't think it will end up nice. I can make tissue foil. Do you think tissue foil is a good choice? Also, I heard that there is a place where I can get japanese papers. If it was true, would one of them work for me?

I wouldn't recommend any kind of foil paper for Ryujin. I think the best thing you could do is buy some mulberry paper from origami shop and glue 2 sheets together to get a square that's at least 80 cm * 80 cm . I recommend mulberry because of it's thickness and strength. Probably the hardest thing to do on Ryujin's is neck-twist and I assure you that you won't have any problems doing that with mulberry.
User avatar
Dj origami
Super Member
 
Posts: 219
Joined: November 11th, 2012, 3:22 pm
Location: Ljubljana,Slovenia / Nish,Serbia

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby jetty2208 » February 22nd, 2015, 6:48 am

hey can anyone help me on how to start the scales on ryujin 3.5 for the tail like picture diagrams or somehing i know how to shape the tail already
jetty2208
Newbie
 
Posts: 3
Joined: February 22nd, 2015, 6:31 am

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Can Cebeci » February 23rd, 2015, 12:42 pm

https://www.youtube.com/watch?v=f-nO0hgrX9M

I have found this youtube video a while ago. It explains how to fold the scales of ryujin 3.5. If you don' get where to do those reverse folds which form squares on your model, let me know.
Can Cebeci
Junior Member
 
Posts: 55
Joined: September 8th, 2014, 9:26 pm

PreviousNext

Return to Diagrams & Crease Patterns

Who is online

Users browsing this forum: No registered users and 3 guests