Satoshi Kamiya - Ryu Zin (CP)

Need help with folding a model? Ask here.

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby SeekerKuba » November 27th, 2018, 12:55 am

Those 4 sections are 22.5...
SeekerKuba
Newbie
 
Posts: 6
Joined: April 15th, 2018, 11:23 am

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Baltorigamist » November 28th, 2018, 3:36 am

Merman -> They're based on 22.5--otherwise the axial creases on either side wouldn't line up.
After the fall, we rise.

My Flickr
Baltorigamist
Moderator
 
Posts: 2109
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted little mind....

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby merman » November 28th, 2018, 6:23 pm

Thx. Then the cp Kamiya created has angles that are a bit off in the head section. The leg sections seem ok.
User avatar
merman
Senior Member
 
Posts: 305
Joined: February 23rd, 2008, 3:02 pm
Location: Amsterdam

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Tahaorigami » December 4th, 2018, 7:39 pm

Image

Image

After 3 months! Working on the lower scales right now. Paper used was 2m x 2m white tracing paper.
User avatar
Tahaorigami
Senior Member
 
Posts: 287
Joined: December 28th, 2012, 8:37 pm
Location: Pakistan

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Tahaorigami » December 19th, 2018, 12:25 pm

Done with the Ryujin 3.5
Tracing paper 2m x 2m
Time taken: 4 months

Image

Image

Image

Image

Image

Image

If you plan to fold it, make sure you have lots of patience and don't usually get frustrated easily, or else you'll end up screwing up the whole thing. If you get stuck at a molecule, take a break! (im serious)
Later, test fold the difficult molecule on a separate piece of paper to prevent crumpling on the original. That's how you will end up with a neat fold and your hard work will pay off!
User avatar
Tahaorigami
Senior Member
 
Posts: 287
Joined: December 28th, 2012, 8:37 pm
Location: Pakistan

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Diego030505 » January 12th, 2019, 7:27 pm

Hello, could someone help me I will start folding the ryujin 2.1 and also I will do the 3.5 (in the future a little distant) and I would like you to help me with tips and crease patterns of parts of the ryuijin (both 2.1 and 3.5), to do test folds, I would like that I stay as clean as possible and that's why I think I should practice before. I also wanted to know if the scales of ryujin 2.1 can be shaped because it would give a good result to the dragon. Thanks in advance.
User avatar
Diego030505
Newbie
 
Posts: 7
Joined: January 12th, 2019, 6:58 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Diego030505 » January 13th, 2019, 4:11 am

Hello, I will start to double the ryujin 2.1 and also the 3.5 (in the near future), could you help me with tips and send parts of the cp of both versions to test folds, especially on the leg because I read that is so difficult? (the majority who were in the forum disappeared), because I think that to achieve a very clean finish I must practice. Thanks in advance :D .

PSDT: Is there any way to shape the scales of ryujin 2.1?
User avatar
Diego030505
Newbie
 
Posts: 7
Joined: January 12th, 2019, 6:58 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Tahaorigami » January 14th, 2019, 4:11 pm

Diego030505 wrote:Hello, could someone help me I will start folding the ryujin 2.1 and also I will do the 3.5 (in the future a little distant) and I would like you to help me with tips and crease patterns of parts of the ryuijin (both 2.1 and 3.5), to do test folds, I would like that I stay as clean as possible and that's why I think I should practice before. I also wanted to know if the scales of ryujin 2.1 can be shaped because it would give a good result to the dragon. Thanks in advance.


The scales of Ryujin 2.1 can't be shaped due to their smaller size. Even if you use a larger sheet, they won't be that impressive due to lack of dorsal spines.
Just test fold the head, legs, tail, scales and neck twist for the 2.1 and later, the 3.5!
User avatar
Tahaorigami
Senior Member
 
Posts: 287
Joined: December 28th, 2012, 8:37 pm
Location: Pakistan

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Diego030505 » January 20th, 2019, 7:06 pm

But I would like to know where to find the CP of the complete legs of 3.5 and if there is a cp for the ryujin 3.1, and if not, how they do it to do it. Thanks in advance.
User avatar
Diego030505
Newbie
 
Posts: 7
Joined: January 12th, 2019, 6:58 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby e-mo » February 6th, 2019, 10:08 am

Hi all..

I just found the largest ever folded Ryu Zin 3.5 I believe:
https://flic.kr/p/BNQc6U

Papersize 10mx10m
Outcome: 6m
e-mo
Super Member
 
Posts: 170
Joined: April 20th, 2008, 4:37 pm
Location: Germany

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Merlyngami » February 7th, 2019, 7:16 pm

If you look it up on youtube, there's a timelapse video of the giant ryujin being folded.
See some photos on my flickr
User avatar
Merlyngami
Junior Member
 
Posts: 115
Joined: December 6th, 2015, 8:22 am
Location: New Zealand

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Diego030505 » February 9th, 2019, 2:48 am

And somebody can help me to found a cp for the legs of the ryujin?
User avatar
Diego030505
Newbie
 
Posts: 7
Joined: January 12th, 2019, 6:58 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Merlyngami » February 9th, 2019, 8:20 am

There is a full crease pattern for the Ryujin 3.5 in Satoshi Kamiya's book 'World of Super Complex Origami'. This is the only place any part of the crease pattern is legally avaliable. Satoshi Kamiya has not publicly released a CP for the 3.1, but I believe the people who have folded it have reverse-engineered it. The only scaled Ryujin which has a freely avaliable CP is the 2.1, and it can be found here.
Hope this helps :)
See some photos on my flickr
User avatar
Merlyngami
Junior Member
 
Posts: 115
Joined: December 6th, 2015, 8:22 am
Location: New Zealand

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Diego030505 » February 9th, 2019, 3:57 pm

Thank you but I'm looking for a cp of the legs of ryujin 3.5
User avatar
Diego030505
Newbie
 
Posts: 7
Joined: January 12th, 2019, 6:58 pm

Re: Satoshi Kamiya - Ryu Zin (CP)

Postby Baltorigamist » February 9th, 2019, 7:12 pm

As Merlyn said, the only legitimate way of obtaining the official crease pattern is in the book mentioned above.
That said, a partial CP was floating around a while ago on another site. However, I can’t remember where, and it may have since been removed.
After the fall, we rise.

My Flickr
Baltorigamist
Moderator
 
Posts: 2109
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted little mind....

PreviousNext

Return to Diagrams & Crease Patterns

Who is online

Users browsing this forum: No registered users and 2 guests