Reference Help

General discussion about Origami, Papers, Diagramming, ...
Baltorigamist
Moderator
Posts: 2376
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted mind....

Re: Reference Help

Post by Baltorigamist »

Forgive the double-post, but I've run into some trouble regarding the reference points for a model I've been working on.

The reference is (4+(2sqrt2)) : (7+(2sqrt2)). I'm going to use the midpoint of the edge as another reference point, so the equivalent proportion in each quadrant would be (from the corner) (4+(2sqrt2)) : 3. The first part is easy to find since it's essentially a Fish Base, but for some reason I'm having trouble constructing (7+(2sqrt2)).
An alternate proportion that would be of equal help is (3+(2sqrt2)) : 4. It, too, should be easier than I'm finding it to be.

Any help will be greatly appreciated.
After the fall, we rise.

My Flickr
User avatar
Gerardo
Buddha
Posts: 2119
Joined: March 4th, 2010, 2:36 am
Contact:

Re: Reference Help

Post by Gerardo »

Hi guys. What references can I use to crease the following marks in my paper?

Image

The rest of my model is very simple to fold so I do hope that this part doesn't get to complicated :).

Thanks in advance!
Last edited by Gerardo on April 6th, 2018, 1:39 am, edited 1 time in total.
.
My awesome website: https://www.neorigami.com
and Instagram account: https://instagram.com/NeorigamiCom
User avatar
origami_8
Administrator
Posts: 4371
Joined: November 8th, 2004, 12:02 am
Location: Austria
Contact:

Re: Reference Help

Post by origami_8 »

Kabuntan
Super Member
Posts: 196
Joined: February 4th, 2014, 5:52 pm

Re: Reference Help

Post by Kabuntan »

I like to use dichotomy to crease in 5ths (that's what is explained in the second link from origami_8 post).

The advantage is that you don't have unwanted creases (apart on an edge - but with a bit of practice, you can fold in 5ths quite exactly on your first iteration).
User avatar
Gerardo
Buddha
Posts: 2119
Joined: March 4th, 2010, 2:36 am
Contact:

Re: Reference Help

Post by Gerardo »

Thanks guys. I checked out the links you sent me origami_8. The tenth I need is regarding the diagonal middle of the paper. I think the method in the second weppage, the diagrams made by you Anna, is doable making the pinch folds over the diagonal middle instead of the border of the paper. I'm gonna try it out later today.

I was hoping there were other methods precisely because I'm looking for the tenth regarding the diagonal middle instead of the horizontal or vertical. What do you guys think?
.
My awesome website: https://www.neorigami.com
and Instagram account: https://instagram.com/NeorigamiCom
User avatar
origami_8
Administrator
Posts: 4371
Joined: November 8th, 2004, 12:02 am
Location: Austria
Contact:

Re: Reference Help

Post by origami_8 »

But Gerardo, it is fifths on the edge of the paper, so any method that gives you fifths on the edge of the paper will do. But I agree, that making the fifths along the middle line using the method from my diagrams is the easiest, since you get only two additional pinches per middle line.

Image
User avatar
Gerardo
Buddha
Posts: 2119
Joined: March 4th, 2010, 2:36 am
Contact:

Re: Reference Help

Post by Gerardo »

Ok, my mind was blown! I should've known that but I didn't :o. Thanks origami_8, this will be very useful for future models :D.

Also, I tried your method in the diagonal middle line and it worked perfectly :).
Baltorigamist
Moderator
Posts: 2376
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted mind....

Re: Reference Help

Post by Baltorigamist »

Any ideas for how to achieve ((3sqrt2)+4) : 4 : 2 (from the corner) in one quadrant of the paper? I've tried everything I know, and nothing's given me the desired proportion.
It's for what I hope will be a final version of my Tiger model.

Thanks in advance.
After the fall, we rise.

My Flickr
User avatar
origami_8
Administrator
Posts: 4371
Joined: November 8th, 2004, 12:02 am
Location: Austria
Contact:

Re: Reference Help

Post by origami_8 »

Gerardo wrote:Thanks origami_8
You're welcome! :D
Baltorigamist
Moderator
Posts: 2376
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted mind....

Re: Reference Help

Post by Baltorigamist »

Baltorigamist wrote:Any ideas for how to achieve ((3sqrt2)+4) : 4 : 2 (from the corner) in one quadrant of the paper?
Never mind--I figured it out:
(The blue lines mark the desired proportions, for anyone interested.)
https://s15i.imgup.net/Referencepa2ae.png
After the fall, we rise.

My Flickr
Tankoda
Senior Member
Posts: 285
Joined: July 18th, 2016, 12:33 am
Contact:

Re: Reference Help

Post by Tankoda »

This thread has been pretty inactive for a while but here goes.

The reference point I am trying to find is 1:1+2sqrt(6-4sqrt(2))+sqrt2.... Havent been able to quite understand some previous explanations, as images have since died.

Any help would be appreciated!
Baltorigamist
Moderator
Posts: 2376
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted mind....

Re: Reference Help

Post by Baltorigamist »

For irrational reference points of the form a+b(sqrt2), Satoshi Kamiya has a generator here. Tankoda, you might be able to convert your needed reference and use that.

Failing that, is there a desired split of the latter part of your reference point?
After the fall, we rise.

My Flickr
Tankoda
Senior Member
Posts: 285
Joined: July 18th, 2016, 12:33 am
Contact:

Re: Reference Help

Post by Tankoda »

Thanks for the link, that looks helpful. I don't think my ratio can be simplified though...

What do you mean by a desired split?
Baltorigamist
Moderator
Posts: 2376
Joined: December 25th, 2011, 7:15 pm
Location: Inside my twisted mind....

Re: Reference Help

Post by Baltorigamist »

After crunching the numbers a little, I managed to simplify it down to 1 : (5-sqrt2).
This translates to 1/(6-sqrt2), which I put into Kamiya’s calculator as (6) + ((-1)sqrt2). It gave a fairly easy solution, but I can’t link to it due to the limits of his site.
See if you get the same decimal as I did: 0.21806.
After the fall, we rise.

My Flickr
Tankoda
Senior Member
Posts: 285
Joined: July 18th, 2016, 12:33 am
Contact:

Re: Reference Help

Post by Tankoda »

The decimal representation I have is 0.278879...
Post Reply