FearlessFlourish Origami
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Another Vase by lang!
Paper is created by Cave Paper, around 150gsm.
Paper is created by Cave Paper, around 150gsm.
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
No Eat! Sea Bream by Igarashi Tomosuke, folded from the crease pattern.
Paper is Commissioned O-GAMI Paper by Paper Circle, shades of blue & white, thin 30gsm, lustre shine with enriched colours all within a perfectly crisp sheet which you can buy here - https://papercircle.org/
The first set of 2 scale sections collapsed!
After ghost creasing stage is complete, trim of the excess paper and form the creases !
The Base
Paper is Commissioned O-GAMI Paper by Paper Circle, shades of blue & white, thin 30gsm, lustre shine with enriched colours all within a perfectly crisp sheet which you can buy here - https://papercircle.org/
The first set of 2 scale sections collapsed!
After ghost creasing stage is complete, trim of the excess paper and form the creases !
The Base
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Asian Arowana by Ikuno Riku
There isn’t a “No Eat” in the title for this fish so I’m going to eat this.
Paper is OGAMI by Paper Circle which you can buy here - https://papercircle.org/
No glue was used at the very top front centre, Its a spot where the cotton wool combined with the shaping i did which creates pressure pushing up so if i add glue and that part opens up, boom, glue marks forever and the appearance will be ruined, permanently.
An extremely fun model to fold and especially shape. The one thing i love with shaping is going about and figuring it all out, how to aquire each part of the model to then turn it into what i want it to be, certainly an amazing & challenging yet rewarding process.
The crease pattern was ghost creased to make only the essential creases needed and not a single extra, now thats how you skip precreasing !
There isn’t a “No Eat” in the title for this fish so I’m going to eat this.
Paper is OGAMI by Paper Circle which you can buy here - https://papercircle.org/
No glue was used at the very top front centre, Its a spot where the cotton wool combined with the shaping i did which creates pressure pushing up so if i add glue and that part opens up, boom, glue marks forever and the appearance will be ruined, permanently.
An extremely fun model to fold and especially shape. The one thing i love with shaping is going about and figuring it all out, how to aquire each part of the model to then turn it into what i want it to be, certainly an amazing & challenging yet rewarding process.
The crease pattern was ghost creased to make only the essential creases needed and not a single extra, now thats how you skip precreasing !
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Sea Horse by LUI Shixiang
Folded from around 20-25cm square of my burnt acid EvliChi and thin Hanji.
Folded from around 20-25cm square of my burnt acid EvliChi and thin Hanji.
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Thors Hammer!
Thor, The God Of Thunder's hammer, Mjollnir, brilliantly designed by pelomba https://instagram.com/pelomba?igshid=MzMyNGUyNmU2YQ== An extremely iconic design
Cardboard has been cut to the exact sizes of4 off the 6 sides then attached to the inside of the metal with glue then filled with cotton wool.
The final size of my fold is for the metal, 6 inches x 2 1⁄2 inches( 15.24cm x 6.35cm) and 10 inches (25.4cm) from the top of the metal to the bottom of the handle; this can vary depending on how it's shaped. According to google, the dimensions of the actual hammer is, for the metal 8.7 Inches x 5.5 Inches (14cm x 22cm) and 17.4 Inches (44cm) from the top of the metal to the bottom so to get as close as possible to a replica size, use between 120cm -130cm.
The crease pattern has been fully ghost creased to create only the creases needed and not a single extra, completely skipping pre creasing and getting the finished model 100% cleaner.
Thor, The God Of Thunder's hammer, Mjollnir, brilliantly designed by pelomba https://instagram.com/pelomba?igshid=MzMyNGUyNmU2YQ== An extremely iconic design
Cardboard has been cut to the exact sizes of4 off the 6 sides then attached to the inside of the metal with glue then filled with cotton wool.
The final size of my fold is for the metal, 6 inches x 2 1⁄2 inches( 15.24cm x 6.35cm) and 10 inches (25.4cm) from the top of the metal to the bottom of the handle; this can vary depending on how it's shaped. According to google, the dimensions of the actual hammer is, for the metal 8.7 Inches x 5.5 Inches (14cm x 22cm) and 17.4 Inches (44cm) from the top of the metal to the bottom so to get as close as possible to a replica size, use between 120cm -130cm.
The crease pattern has been fully ghost creased to create only the creases needed and not a single extra, completely skipping pre creasing and getting the finished model 100% cleaner.
Re: FearlessFlourish Origami
Impressive model! And probably easier to lift than the real one.
How do you ghost-crease? Do you lightly trace checkpoint marks on the paper before creasing?
How do you ghost-crease? Do you lightly trace checkpoint marks on the paper before creasing?
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
It is haha thank you,.
Essentially yes, i overlay the crease pattern onto the paper im using, attach it temporarily using "blu tac"so it doesent move or shift, then gently score over all the lines i need then once im confident ive got them all, just remove the overlay, cut of the excess paper and make the creases, the you can fold!
Essentially yes, i overlay the crease pattern onto the paper im using, attach it temporarily using "blu tac"so it doesent move or shift, then gently score over all the lines i need then once im confident ive got them all, just remove the overlay, cut of the excess paper and make the creases, the you can fold!
Re: FearlessFlourish Origami
Thanks for the explanation. That's really a lot of work and precision, but the result is worth it.
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Thanks!, well worth the extra effort
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
The third Kusudama ive ever made !
Design is by Prworigami
Last time i made one was 10 years ago (to long)
Design is by Prworigami
Last time i made one was 10 years ago (to long)
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Sea Horse By LUI Shixiang!
Diagram in the book Tanteidan 27
Inside the glass or outside the glass?!?
Diagram in the book Tanteidan 27
Inside the glass or outside the glass?!?
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Kamiyas Wasp 2.6 !
Its the same fold i made way back but i revamped the shaping
Its the same fold i made way back but i revamped the shaping
-
- Newbie
- Posts: 33
- Joined: November 28th, 2021, 11:45 am
Re: FearlessFlourish Origami
Leaf Insect by Kota lmai !
From around 20ish cm of my ElviChi, created a mix shades of green to try match an actual leaf.
From around 20ish cm of my ElviChi, created a mix shades of green to try match an actual leaf.