Twisted Wire Art
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
Twisted Wire Art
Made by the members of Yahoo Group Twisted Wire Art!
My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember. I couldn't find anything online about the subject, so I made some makeshift instructions and posted them. Now others have learned & taken it further with new models. Seeing their creations I has inspired me in turn to create new things.
Links
Yahoo Group Twisted Wire Art!(in Italian)
My main Gallery (Access will be denied depending on where you live)
Instructions on the Vietnam Origami Group forum
Another source for Instructions (access limited)
My Gallery on flickr
My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember. I couldn't find anything online about the subject, so I made some makeshift instructions and posted them. Now others have learned & taken it further with new models. Seeing their creations I has inspired me in turn to create new things.
Links
Yahoo Group Twisted Wire Art!(in Italian)
My main Gallery (Access will be denied depending on where you live)
Instructions on the Vietnam Origami Group forum
Another source for Instructions (access limited)
My Gallery on flickr
- Ondrej.Cibulka
- Buddha
- Posts: 1055
- Joined: January 9th, 2006, 4:18 pm
- Location: Czech republic
- Contact:
Re: Twisted Wire Art
Vhich one? Gold or green? Or they have the same design?My friend Summer Barnett taught me how to make a scorpion, it took less than 10 minutes & was easy to remember.
Ondrej Cibulka Origami, www.origamido.cz
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
<embed src="http://www.youtube.com/v/VKLbyICqxfc" type="application/x-shockwave-flash" wmode="transparent" width="320" height="250"></embed>
I hope this is easy enough to learn from.
If you make one please post a photo!
Use this same method to come up with your own creations!!!!
I hope this is easy enough to learn from.
If you make one please post a photo!
Use this same method to come up with your own creations!!!!
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
Lesson #1
Wire Twisted Scorpion.
I will add instructions for different models upon request.
1.12 wires, equal length
2.Divide wires into 2 groups of 4 and 8. 8 wires = Legs, 4 = everything else.
3.Loop 8 wires in the center.
4.Left over right.
5.Finished loop.
6.All wires must loop the same, Left over right.
7.8 wires with loop. All Left over right. Finished.
8.Place the 4 wires into all the loops.
9.Loops are all the same direction.
10.Make the loops tight.
11.Finished view.
12.View from behind.
13.Bend over the front, to the opposite side. Use the first wire.
14.Bend behind to the opposite side. Use the same wire.
15.Repeat step 13-14 with top wire. (Opposite side, opposite direction.)
16.View of steps 1-15 complete.
17.Repeat step 15 on all wires. (16 total, 8 on each side.)
18.Finished close up view.
19.Turn model over. Close up view of back side.
20.Long side of body pointing up.
21.Seperate 2 wires on one side. Use the top wires.
22.Twist 2 wires together.
23.Repeat on all other wires, both sides.
24.Finished twisting legs.
25.Wrap 1 wire around the other 3.
26.Wrap 1 wire around the other 2.
27.Wrap 1 wire around the last wire. Use half the length to wrap, use other half to form the stinger.
28.Turn model over.
29.Seperate wires into 2 pairs.
30.Twist each pair. Partial twist. Less than halfway.
31.Trim the legs and claws. Use wire cutters.
32.Bend the legs above the body.
33.Bend the legs below the body. Shape the claws and tail.
Finished veiw of the completed model.
Wire Twisted Scorpion.
I will add instructions for different models upon request.
1.12 wires, equal length
2.Divide wires into 2 groups of 4 and 8. 8 wires = Legs, 4 = everything else.
3.Loop 8 wires in the center.
4.Left over right.
5.Finished loop.
6.All wires must loop the same, Left over right.
7.8 wires with loop. All Left over right. Finished.
8.Place the 4 wires into all the loops.
9.Loops are all the same direction.
10.Make the loops tight.
11.Finished view.
12.View from behind.
13.Bend over the front, to the opposite side. Use the first wire.
14.Bend behind to the opposite side. Use the same wire.
15.Repeat step 13-14 with top wire. (Opposite side, opposite direction.)
16.View of steps 1-15 complete.
17.Repeat step 15 on all wires. (16 total, 8 on each side.)
18.Finished close up view.
19.Turn model over. Close up view of back side.
20.Long side of body pointing up.
21.Seperate 2 wires on one side. Use the top wires.
22.Twist 2 wires together.
23.Repeat on all other wires, both sides.
24.Finished twisting legs.
25.Wrap 1 wire around the other 3.
26.Wrap 1 wire around the other 2.
27.Wrap 1 wire around the last wire. Use half the length to wrap, use other half to form the stinger.
28.Turn model over.
29.Seperate wires into 2 pairs.
30.Twist each pair. Partial twist. Less than halfway.
31.Trim the legs and claws. Use wire cutters.
32.Bend the legs above the body.
33.Bend the legs below the body. Shape the claws and tail.
Finished veiw of the completed model.
-
- Newbie
- Posts: 40
- Joined: June 19th, 2006, 7:23 am
- Contact:
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
Thank you, I believe she used the same amount, but used more length on the 4 wires making the tails and claws. She also used a wire similiar to the flat twist tie wires covered in a flat plastic used to seal bread bags with.Lux Aeterna wrote:Wow, those are awesome. Is the larger scorpion (pictured in green) made pretty much the same way, but with more/longer wires?
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact:
Here is the first post I have seen since I made the video.
It looks like the person who made it is in Sweden.
As far as I know, this is the first "non-paper folder" to try it!
<embed src="http://www.youtube.com/v/UQ70UXVS9vk" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed>
It looks like the person who made it is in Sweden.
As far as I know, this is the first "non-paper folder" to try it!
<embed src="http://www.youtube.com/v/UQ70UXVS9vk" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed>
- thedeadsmellbad
- Forum Sensei
- Posts: 773
- Joined: December 23rd, 2004, 12:27 am
- Location: U.S.A
- Contact: